|
❶ |
Push a M/F spacer
(M2.5*12mm) up through
the mounting hole on the topside of the X856 and
screw down with a F/F spacer
(M2.5*8mm) |
|
|
|
❷ |
a) Insert your MSATA SSD into the socket.
b) Align the notches on the SSD with the notches in
the
socket, then insert as shown.
c) Screw
(M2.5*6mm) the
SSD into place. |
|
 |
|
 |
| |
|
|
|
❸ |
Place your Raspberry Pi
on top of X855 and screw down
(M2.5*6mm screws). |
|
|
|
❹ |
Insert the USB jumper
into USB ports. |
|
 |
|
 |
| |
|
|
|
❺ |
Optional -To use with
X735 /
X710 /
X765 power
mgmt board
a) Unscrew 4 screws and spacer on
the topside of Rpi
b) Screw the M/F spacer
(M2.5*12mm) down until it is
hand
tight |
 |
|
|
❻ |
Optional -To use with
X735 power
mgmt board
Plugs the X735 straight into your Raspberry Pi's GPIO header and screw down (M2.5*5mm
screws)
Power adapter must be
connected to the X735 only , not Raspberry Pi. |
 |
| |
|
|
|
❼ |
Optional -To use with
X710 power mgmt board
Plugs the X710 straight into your Raspberry Pi's GPIO header and screw down (M2.5*5mm
screws)
Power adapter must be
connected to the X710 only , not Raspberry Pi. |
|
|
|
❽ |
Optional -To use with
X765
power mgmt board
Plugs the X765 straight into your Raspberry Pi's
GPIO header and screw down
(M2.5*5mm screws)
Don't connect
any power adapter to Raspberry Pi when
powering over Ethernet. |
|
 |
|
 |
| |
|
|
|
❿ |
Optional -To use with
X725
power mgmt board
a) Unscrew screws and spacer on the topside of
Raspberry pi
b) Screw the M/F spacer
(M2.5*23mm) down
until it is hand
tight
c) Plugs the X725 straight
into your Raspberry Pi's GPIO
header and screw down
(M2.5*5mm screws)
Power adapter must be
connected to the X725 only , not Raspberry Pi. |
|
|
|
 |
|
|
| |
|
|