Home     Products     Web Store       Product Customization       OEM/ODM     Contact  
     
    Board Assembly    X857           
     
 
Attach the 12mm F/F spacer to the top of the X857 mounting holes by inserting the 8mm M/F spacers from the bottom of the X857.
 
a) Insert your MSATA SSD into the socket.
b) Align the notches on the SSD with the notches in the
     socket, then insert as shown.
c) Screw (M2.5*6mm)  the SSD into place.
  
 
     
Attach the Rpi to the X857's spacers and secure in place using the M2.5 screws.
 
Plugs the USB jumper into the Rpi's and X857's USB3 ports
 
     
Optional -To use with X735 / X710 / X765 power mgmt board

a) Unscrew 4 screws and spacer on the topside of Rpi
b) Screw the M/F spacer (M2.5*12mm) down until it is hand
    tight
 
  Optional -To use with X735 power mgmt board

Plugs the X735 straight into your Raspberry Pi's GPIO header and screw down (M2.5*5mm screws)
Power adapter must be connected to the X735 only , not Raspberry Pi and X857. 

     
Optional -To use with X710 power mgmt board

Plugs the X710 straight into your Raspberry Pi's GPIO header and screw down (M2.5*5mm screws)
Power adapter must be connected to the X710 only , not Raspberry Pi and X857. 
 
Optional -To use with X765 power mgmt board

Plugs the X765 straight into your Raspberry Pi's GPIO header and screw down (M2.5*5mm screws)
Don't connect any power adapter to Raspberry Pi and X857 when powering over Ethernet. 
 
     
Optional -To use with X725 power mgmt board
a) Unscrew screws and spacer on the topside of Raspberry pi
b) Screw the M/F spacer (M2.5*23mm) down until it is hand
    tight
c) Plugs the X725 straight into your Raspberry Pi's GPIO
    header and screw down (M2.5*5mm screws)
Power adapter must be connected to the X725 only , not Raspberry Pi and X857. 
   
   
 
 
       
 
     
  © 2019 SUPTRONICS TECHNOLOGIES LIMITED, ALL RIGHTS RESEVERED