Home     Products     Web Store       Product Customization       OEM/ODM     Contact  
     
    X862 M.2 NGFF SATA SSD Shield Hardware   Software
 
         
   
         
   
         
     
         
 
      Product Description   
     
  The X862 M.2 NGFF SATA SSD expansion board, offering an easy and fast way to create big storage solution for your Raspberry Pi 4B. Its elegant and ultra-compact design allows M.2 SSD to be conveniently attached to Raspberry Pi. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds. The mounting holes and standoffs help protect the hard disk drives, while effectively drawing the heat away from the drive for reliable performance. The built-in LED light indicates the reading or writing status – no more guesswork again.

The X862 can be the perfect storage solution for your home media center and building Network-attached storage (NAS) for storing and streaming your own videos, music, and digital photos around the house and even across the world. the X862 also supports operating system booting from your SSD for faster app opens, web serving and file copying.
 
     
    Product Features
     
 
For Use With
- Raspberry Pi 4 Model B
Operating System
- All Raspberry Pi operating systems
Key Features
   
- Ideal storage solution for Raspberry Pi 4 - M.2 NGFF SATA SSD Shield
- Supports up to 2TB m.2 NGFF SSD solid-state drive
  Supports multiple M.2 NGFF SSD lengths including: 2280, 2260, 2242, 2230
- Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller
- Integrated high efficiency step-Down Converter, 3.3V max 4A to power the SSD
- USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4
- Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see notes)
- LED blue indicator indicates drive status
- External self-powered or USB bus-powered
- Onboard DC jack & XH2.54 connector for extra SSD power supply
- Specially-made USB3.1 jumper to connect with Raspberry Pi - no cabling required!
- Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
- Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management
- Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
- Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)
   
Power Supply
I/O ports
   
- Power supply:  5Vdc +/-5% , Powered via USB port by Raspberry Pi
                          5Vdc via DC power jack or XH2.5 connector, Extra power supply for SSD 
- Ports & Connectors: USB socket - USB 3.0 type A x1
                                    Power input jack 5.5*2.5mm x1 
                                    XH2.54 SSD power input connector x1
                                    67Pin M.2 connector P=0.5mm, H3.2mm, Key B x1
- PCB Size 87mm x 56mm
   
Notes
   
- 1) Additional spacer required for SSD lengths 2260, 2242 and 2230 (not supplied with X872)
- 2) A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition
- NGFF SATA SSD is not included
- Compatible with M.2 NGFF SATA SSDs only, not compatible with NVMe M.2 SSDs
- As with all SSDs, new media must be formatted before use
- SSDs use exceptionally high performance storage media that will run hot when under load
- Older SSD drives with less efficient flash media may not perform as well as newer drives
   
 
     
    Box Contents
 
       
- X862 mSATA SSD shield x 1  
- USB3.1 jumper x 1  
- Screw M2.5 *6mm x 6  
- Spacer M/F M2.5 *12mm x 4  
- Spacer F/F M2.5 *8mm x 4  
- Screw driver x 1  
- Screw M2.5 *6mm x 1  
 
     
    Optional Accessories
     
 
  X735 V2.1  
 
- Smart power management
- Supports safe shutdown
- Supports full poweroff
- Auto-Control cooling fan 
- 40-pin header Reserved
  See details  
  X710  
 
- Smart power mgmt board
- Wide 6~36V input range
- 5.1V 5000mA output
- Supports safe shutdown
- Low-noise cooling fan
  See details  
  X765  
 
- Power over Ethernet board
- IEEE802.3at PoE standard
- 5V/5A 25W DC output
- Isolated switched-mode
- 4 XH2.54 power connectors
  See details  
  X728
 
- 5.1V 8A 18650 UPS Shield
- Smart power management 
- AC Power loss detection
- Auto on & Safe shutdown
- Fuel-gauge systems  
  See details  
 
 
       
 
     
     
  © 2019 SUPTRONICS TECHNOLOGIES LIMITED, ALL RIGHTS RESEVERED