Home     All DIY Kits     All Expansion Boards     Accessories     Web Store     OEM/ODM     Contact  
     
    Software Configuration   X930          
     
    Script for power management (Volumio)
     
 
<1> Enable SSH access on volumio
  https://volumio.github.io/docs/User_Manual/SSH.html
   
<1> Download the required script
  pi@raspberrypi ~ $  wget https://raw.githubusercontent.com/suptronics/X930/main/x930.sh
   
<2> Install the script
  pi@raspberrypi ~ $  sudo bash x930.sh
   
<3> Setting up the command to turn off X930 from software 
  pi@raspberrypi ~ $  printf "%s\n" "alias x930off='sudo x930softsd.sh'" >> ~/.bashrc 
   
<4> Reboot the Raspberry Pi
  pi@raspberrypi ~ $  sudo reboot
   
<5>  Powering off the Raspberry Pi from software 
  pi@raspberrypi ~ $  x930off 
   
 
     
 
       
             
 
     
    Volumio
 
 

  1. Write SD card image and boot Pi.
  2. connect from web browser to volumio.local
  3. Select the top right hand side (burger) menu and select PLAYBACK OPTIONS.
  4. Turn on "I2S DAC" and select "ST400" under“DAC Model.” Then reboot and you are done.

  
     
    Moode Audio Player  
     
 

  1. connect from web browser to moode.local
  2. Select configure from the pull down menu, then system.
  3. Within the Audio section select the device you have (such as Pi-DAC+) and press SET
  4. Within the same selection make sure you set the volume to around 20% (not 100%) and press SET
  5. Select reboot

  Once reconnected….
  6. Select configure from the pull down menu and then MPD
  7. Within Setting, select volume control - hardware and then APPLY
  8. Select reboot

  
   
    RuneAudio  
     
 

  1. Write SD card image, boot Pi.
  2. ssh into the Pi as root (password rune) and edit /boot/config.txt to select the IQaudio Pi-DAC+ devicetree overlay. Save and reboot
  3. connect from web browser to runeaudio.local
  4. select the pull down settings menu and select MPD, here change audio interface to IQaudIO DAC, beneath this select Volume control: enabled-hardware
  5. Press SAVE AND APPLY

  
    OpenElec  
     
 

  1. Download Stable Openelec 6.0.3 image from http://releases.openelec.tv/OpenELECRPi2.arm-6.0.3.img.gz
  2. Write image to SD card
  3. Boot Openelec
  4. SSH into the Raspberry PI and edit config.txt to include the device tree
  5. mount -o remount,rw /flash
  6. nano /flash/config.txt
     # audio interfaces
     dtoverlay=iqaudio-dacplus
     # optional hardware interfaces
     dtparam=i2s=on

  7. Once above changes have been made, then ctrl+x to save.
  8. mount -o remount,ro /flash
  9. reboot

  
     
    OSMC
     
 
❶ Select My OSMC and enter "Pi Config".
 
❷ Select "Hardware Support" and choose your "IQaudio-dac-overlay" in the Soundcard Overlay parameter.
 
 
❸ Restart your Raspberry Pi.
 
❹ Select "Settings".
 
   
     
 
❺ Select "System".
 
   
     
 
❻ Select "Audio output" and set the Audio output device parameter to ALSA: Default (snd_rpi_IQaudio-dac-overlay)
 
     
     
 
❼ Done!
 
     
 
       
 
     
  © 2017 SUPTRONICS LIMITED, ALL RIGHTS RESEVERED